Engineers & ConsultantRisk · Safety · Energy · Water ManagementThe observation is the beginning. The signature is the point.
One accredited team for the whole obligation: process safety, fire and electrical safety, energy, water, lifting-tool and pressure-plant certification, and the licences that follow. We measure on site, report what an inspector will accept, and stay until the observation is closed.
- DGFASLI
- BEE
- NPC
- Chief Inspector of Factories
- Chief Electrical Inspector
- QCI / NBQP
- Oil and gas
- Petrochemicals
- Fertilizers
- Cement
- Steel and power
- Pharmaceuticals
Site and sector are enough to start. Add the observation or licence reference if you have it.
Prefer to talk? +91-9873669265
The path an observation takes
Every audit ends the same way: something measured, something written, something signed. Nothing is closed because a report was delivered.
Calibrated instruments on site — power analyzer, infrared camera, ultrasonic flow meter, lux meter, gas analyzer.
PHAST, PIPENET, ETAP, ALOHA and ArcGIS carry the dispersion, hydraulic and arc-flash models.
Observations written so a plant team can act on them and an inspector can review them.
A saving or remediation proposal that is practical, costed, and sequenced for implementation.
Follow-up and implementation support until the observation is struck through and the licence or certificate is issued.
The obligation register
Ten families, one team. Everything below is scope we execute with our own engineers and instruments — not work we refer onward. Open a line to see the studies it contains and who is authorised to sign it.
01Process safetyPSM, HAZOP, QRA, fire risk, dust explosion
- PSM audit and implementation
- Fire Risk Assessment (FRA)
- Quantitative Risk Assessment (QRA)
- HAZOP
- Project HSE Review (PHSER)
- Escape, Evacuation and Rescue Analysis (EERA)
- HIRA
- Dust explosion study
- Fire load calculations
- Fire adequacy study
- Ventilation study
- Fire safety audits
Signed byCertified and approved safety officer, DGFASLI — led by a QCI/NBQP lead auditor.
02Fire protection designHydraulics, line sizing, fire water demand
- P&ID for spray and sprinkler systems
- Hydraulic calculations
- Line sizing
- Fire water demand calculations
- Specification, MR and TBA preparation
- Maintenance of fire protection systems
Signed byChartered Engineer, Institution of Engineers (India).
03Electrical safetyAudit, thermography, arc flash, area classification
- Comprehensive electrical safety audit
- Thermography to detect hot spots
- Hazardous area classification
- ARC flash study (ETAP)
- Power system quality
- Chemical safety
Signed byElectrical Safety Auditor, Office of the Chief Electrical Inspector.
04Emergency planningOnsite and offsite plans, ERDMP
- Risk Assessment Plan (RAP)
- Disaster management plan
- ERDMP as per PNGRB regulations
- Offsite and onsite emergency plans (OSEP)
Signed byCertified and approved safety officer, DGFASLI.
05HSE training academyFire, first aid, BBS, ergonomics, PSM
- Fire safety training
- First aid training
- Behaviour based safety (BBS)
- OH&S training
- Human factors and ergonomics
- PSM training
Signed byDelivered by the same engineers who run the audits.
06Energy and climateBEE audits, ECM, carbon, green building
- Detailed energy audit
- Preliminary energy audit
- Energy conservation measures (ECM)
- Verified Carbon Standard (VCS)
- Clean Development Mechanism (CDM)
- Green building services
- GIS and remote sensing
- Water foot-printing assessment
Signed byEnergy Auditor, Bureau of Energy Efficiency.
07Water auditsMeasurement to implementation
- Water measurements on site
- Calculations and balance
- Audit observations
- Saving proposal
- Implementation support
Signed byWater Auditor, National Productivity Council.
08Testing and certificationLifting tackle, pressure plant, ventilation
- Lifting machinery and lifting tackles
- Lifts and hoists
- Dangerous machines
- Pressure plant under Section 21(2), 28, 29 and 31
- Ventilation systems under the relevant schedules
- Certification and report
Signed byCompetent Person, Office of the Chief Inspector of Factories.
09Licences and approvalsPetroleum, fire NOC, CTE/CTO, factory licence
- Petroleum and explosive licences
- Fire NOC
- Factory licence
- Building plan approval
- Ground water clearance
- Pollution CTE and CTO
- Electricity board matters
Signed byChartered Engineer, Institution of Engineers (India).
10Management systems9001, 14001, 45001, documentation
- QMS 9001
- EMS 14001
- ISO 45001
- Documentation support for transition
- Internal auditor training on ISO 14001, 18001 and TS16949
- Safety and environment policies, procedures and targets
Signed byLead Auditor, Quality Council of India and NBQP.
Seven approvals, one report
A compliance buyer checks the authority behind the signature before the price. These are the panels our engineers sit on, and what each one lets us put our name to.
| Credential | Conferred by | Covers |
|---|---|---|
| Certified and approved Safety Officer | Conferred byDGFASLI, Ministry of Labour and Employment | CoversFactory safety audits, statutory safety reports and on-site risk assessment. |
| Energy Auditor | Conferred byBureau of Energy Efficiency | CoversEnergy audits and conservation studies under the Energy Conservation Act. |
| Water Auditor | Conferred byNational Productivity Council | CoversWater audits, water balance and foot-printing assessments. |
| Competent Person | Conferred byChief Inspector of Factories | CoversPressure plant, lifting machinery, dangerous machines and ventilation certification. |
| Chartered Engineer | Conferred byInstitution of Engineers (India) | CoversEngineering certification, process design review and fire protection design. |
| Electrical Safety Auditor | Conferred byChief Electrical Inspector | CoversElectrical safety audits, thermography and hazardous area classification. |
| Lead Auditor | Conferred byQuality Council of India / NBQP | CoversManagement-system audits and internal auditor training. |
- IAEMP
- IIE
- SEEM
- FSAI
- IAENG
- ECI
What the report is built from
Electrical, mechanical and chemical engineers, calibrated instruments on site, and licensed software for the models that cannot be done by hand. The method is the evidence; the adjectives are not.
Instruments on site
- Power analyzer
- Infrared camera
- Ultrasonic flow meter
- Flow meter
- Fuel gas analyzer
- Anemometer
- Lux meter
- Thermo hygrometer
- Thermometer
- Digital manometer
- Conductivity meter
- Thickness meter
- Tachometer
- Digital vernier caliper
Software for the models
- PHAST and PHAST RiskDNV
- PIPENETHydraulic calculation
- ALOHAAreal locations of hazardous atmospheres
- PHA-PROHazard and operability studies
- THESISBow-tie representation
- ISCST3Air dispersion modelling
- MARPLOTPlumes over satellite imagery
- ARCHIEChemical hazard emergency response
- ArcGISEsri
- ERDAS IMAGINERemote sensing analysis
- CIRRUSBritish Petroleum
- ETAPArc flash and power system studies
- Oil and gas
- Petroleum
- Petrochemicals
- Fertilizers
- Cement
- Pharmaceuticals
- Hospitals
- Steel and power
- Automobiles
Plants and companies we have worked with
Reproduced from our company profile and client records. We publish the roster as a list of engagements, not as a claim of endorsement by any of these organisations.

- Schneider Electric
- Saint-Gobain
- Cargill
- United Breweries


- Parle Products
- Gillette
- Nidec
- Siegwerk

Client marks are the property of their respective owners and appear here as they do in the E&C company profile and client records.
Show the full roster (36)Hide the full roster
- Hindware
- F.C.C. Clutch Technology
- Badve Engineering
- Fiem Industries
- Alka Laboratories
- Dorset
- Maharaja Agro Industry
- BKT
- Tata BlueScope Steel
- Johnson Matthey
- Varun Beverages
- Insecticides (India)
- Datta Chemical
- Kingfisher
- RSI India
- RICO Auto Industries
- Sunbeam Auto
- Federal Mogul
- KEI Industries
- Kusum Health Care
- S-CCI
- Nihon
- Uttam Strip
- Gulshan Chemical
Tell us what is open
One enquiry reaches the engineers who will do the work. Give us the site, the sector and the obligation; we will come back with scope, the credential that covers it, and what we need to see on site.
- Alternate
- Info.engineersconsultant@gmail.com
- Phone
- +91-9873669265
- Web
- www.engineersandconsultant.com
- Coverage
- On-site delivery across India